Eisenbach & Ruhnke Engineering
phone: 315.735.1916   
 
   
 

Meet Jack & Mark

 
  Jack Eisenbach: President / CEO

Jack Eisenbach is a licensed Professional Engineer, certified to practice in the states of New York, New Jersey, Massachusetts, and Pennsylvania.

Jack Eisenbach, a member of the National Society of Professional Engineers (NSPE), is a Professional Engineer with more than twenty years of experience.

Prior to founding Eisenbach & Ruhnke Engineering, P.C., Mr. Eisenbach held positions as a Senior Engineer, a Transportation Planner, and a construction project supervisor.

Mr. Eisenbach is also a member of the Association of Energy Engineers (AEE) and holds the following AEE Certifications: Energy Manager (CEM), Energy Auditor (CEA), Measurement and Verification (CMVP) and Building Commissioning (BCP).

M.E. Transportation Rensselaer Polytechnic Institute Troy, New York

B.S. Civil Engineering Rensselaer Polytechnic Institute Troy, New York

Lead Inspector Training University of Massachusetts School of Public Health

Registrations / Certifications

• Professional Engineer (NY, NJ, MA, PA)

• Certified New York State Asbestos Project Monitor

• Certified AHERA Inspector and Management Planner

• Certified NYS Asbestos Project Designer

• Certified NYS Asbestos Inspector


Mark P. Ruhnke, P.E., Vice President

Mark Ruhnke is a licensed Professional Engineer in New York and has more than fifteen years of experience in environmental and energy engineering.

Mr. Ruhnke became a partner with Eisenbach in 2004 and prior to that had worked with Eisenbach since 1995.

Mr. Ruhnke is also a member of the Association of Energy Engineers (AEE)and is certified by the AEE as an Certified Energy Auditor(CEA). B.S.

Environmental and Resource Engineering from the State University of New York College of Environmental Science and Forestry at Syracuse University.

Attended Mohawk Valley Community College for Engineering Science

Registrations / Certifications

• Licensed Professional Engineer (NY)

• Association of Energy Engineers Certified Energy Auditor (CEA)

• New York State Department of Health -Certified as Instructor in USEPA AHERA Asbestos Disciplines

• USEPA -Certified Lead-Based Paint Risk Assessor and Training Director for 40CFR 745 Lead-Based Paint Renovator, Remodel, Painter (LBP-RRP).

• National Environmental Health Association (NEHA)- Certified National Radon Mitigation Professional

 
Copyright ©, All Rights Reserved,    Eisenbach & Ruhnke Engineering, P.C.

Home        |       About Us        |       Our Services        |       Experience        |       Contact Us        |       top of page